CMM Master
Automated, affordable and calibrated for high production shop floor inspection.
CMM Master™, based on the Renishaw Equator™ platform, increases shop floor productivity, reduces scrap and replaces multiple single-use fixture gages at a fraction of the cost of traditional CMM systems. Portability, compact footprint, single phase power and no compressed air requirement makes this system ideal for flexible shop floor inspection and automated production cells.
Verisurf increases the accuracy of the Renishaw Equator™ with Cubic Volumetric Mapping. The unique software technology utilizes a 24 parameter calculation to volumetrically error map the 3D measurement volume and creates a compensation table with tri-cubic interpolation that makes the Verisurf error-corrected Equator significantly more accurate. Every CMM Master comes with calibration certificate and because the accuracy is improved through software, all Equator warranties remain intact.
| Volume accuracy (with Verisurf CVM) | +/-0.0127 mm (.0005 in) |
| Comparison uncertainty | +/-0.002 mm (.000079 in) |
| Maximum scanning speed | 100 mm/s (3.937 in/s) |
| Maximum movement speed | 500 mm/s (19.685) |
| Scanning rate | 1000 points/s |
| Scale resolution | +/-0.0002 mm (.0000079 in) |
| Fixturing requirement | +/- 1 mm (.039 in) |
| Machine air supply | No air required |
| Operating temperature | +10 to +40 °C (+50 to +104 °F) |
| Storage temperature | -25 to +70 °C (-13 to +158 °F) |
| Relative operating humidity | Maximum 80% RH at 40 °C (104 °F), non-condensing |
| Universal power supply | 100-240 VAC +/-10%, 50/60 Hz |
| Maximum power consumption | 190 W |
| Typical power consumption | 80 – 100 W |
| Probe type | Renishaw 3-axis SP25 analog scanning |
| Fixture plate | 305 mm x 305 mm (12 in x 12 in) aluminum |
| Maximum work piece weight | 25 kg (55 lb) |
| System | Standard | Extended |
|---|---|---|
| Working volume XxYxZ | 300mm x 300mm x 150 mm (11.81in x 11.81in x 5.90in) |
300mm x 300mm x 150 mm (11.81in x 11.81in x 5.90in) |
| Height from base | 55mm (2.16in) | 205 mm (8.07in) |
| Machine weight | 25 kg (55.11 lb) | 27 kg (59.52 lb) |
| Dimensions WxDxH | 570mm x 500mm x 700mm (22.44in x 19.68in x 27.56in) |
570mm x 500mm x 850mm (22.44in x 19.68in x 33.46in) |
- 6 position auto change probe rack
- Choice of M8, M6 or ¼ – 20 fixture plates
- MCUlite-2 Joystick
- SP25 3-axis scanning probe
- One year warranty
- Verisurf Coordinate Metrology Software
- NIST Tested
- PTB Certification
- Basic, Intermediate and Advanced probe kits
- Enclosure accessories
- Fixture plates and kits
- One year extended warranty